BunduTec™ has a minimalist approach to engineering, while not compromising on quality. Our products are lightweight, flexible and offers a casual approach to camping culture. Slight variances in each product is a testimony to its handmade origins.
Bundutop- Bundutec Canada - Hard shell automatic roof top tent
As a general guideline we also suggest that you read the tent manual before you purchase one, ensuring that you are familiar with its working and the locations of its various components. It also covers fault finding extensively and should provide additional information on the fitment guidelines.
The BunduTop, our electric rooftop tent, standard size is 2100 x 1350 x 300 mm when closed, and 2100 x 1350 x 1030 mm when open.
The tent weighs about 80 kgs (the weight of the tent is 73kg, with the ladder weighing 7kg).
The tent boasts entry from any side, giving you 360 access and view. Each window/door is manufactured with the canvas on the outside and the mesh on the inside. This allows you to leave the windows open for ventilation, even in poor weather conditions.
This electric rooftop tent pitched in 30 seconds using our Pro Pitch Technology.
The BunduTop comes standard with an aluminium sliding ladder and 2 pockets inside to put keys, cellphones etc. and has a cigarette lighter plug and an LED light inside.
The roof of the BunduTop is a raw aluminium sheet to ensure maximum heat reflection and is the main reason you can sleep comfortably cool inside, even in direct sunlight.
The roof weighs 20 kgs and can carry additional weight of 25 kgs, if evenly spread. You are welcome to install a solar panel on top. We now include solar wiring and it simplifies the installation of a solar panel by allowing the wiring to go unseen through the tent.
The 2000lbs winch motor lifts and lowers the tent with the use of 3mm Dyneme rope on a pulley system.
The foam backed roof-lining absorbs moisture and condensation, but if you are going to extremely cold areas we do recommend putting a carpet under the mattress as insulation, as very cold temperatures creates additional condensation.
The frame built into the bottom of the tent provides additional strength and makes it versatile to mount. It can be bolted directly to your load bars or roof rack.
The mattress inside is 2000 x 1250 x 100 mm and is made from a high density foam. A double bed fitted sheet fits it just fine. This leaves enough space inside the tent so that you can leave your bedding inside.
Kindly arrange your bedding so that it can’t hook into the rope system inside; flattened bedding won’t interfere.
Please ensure you leave some windows open or close only the mosquito net so that trapped air can escape. Trapped air will push out the canvas sides and cause it to not fold in properly when lowering the tent.
When entering or exiting the tent, ensure that the zips are completely zipped down as the zips/mosquito net isn’t designed to carry weight.
The tent has been tested extensively in various locations and weather types. In the USA it has proven to withstand 50 mph winds and has also performed well in snow.
In locations with extreme humidity and heat, the combination can cause extreme condensation inside the tent. This will be UNDERNEATH the mattress. If you are experiencing similar conditions, try to ventilate the tent to prevent the condensation.
Do not open the tent while the latches are still closed as this will damage the tent.
Designed to be hassle-free, using our trademarked Pro Pitch Technology™, these products offer advanced ease of use.
If you have a no-fuss approach to camping, our range of products are suited to your needs.
If you travel fast or enjoy a faster pitching and break-up setup, these products are designed for you.
If you enjoy camping on the same spot for an extended period of time, take into consideration the nature of our products.
Each product page offers a breakdown of its pros and cons to make your selection easier.
HASTLE FREE CAMPING
BUNDUTOP - ELECTRIC ROOF TOP TENT PACK UP
Our Added Room follows the same product guidelines – ease of use. It offers a private entry to your tent and keeps off the rain. It has openings on each side at the top which due to it’s nature cannot be permanently closed. The side panel used to enclose it is a basic design that offers privacy and ventilation. It was also designed to be easy to use and remove and does not offer any luxurious trimmings, but rather a straightforward design with utility in mind. The Added Room comes in a standard size and a custom size for longer BunduTops. PLEASE NOTE however that it can’t be manufactured smaller than our standard size.
You Will Receive: 1 x Long Rope Guide Extrusion 2 x Short Rope Guide Extrusion 2 x Rods 1 x Round Tube 1 x Added Room Roof Side Panel (walls) Optional extra
Pros: The added room offers shade, keeps off rain and offers a private entry to your tent when utilising the side panel. Cons: It absolutely cannot be closed entirely where the top of the added room goes under the tent awning. There will be a small opening